Bobcat T190 Turbo Service Repair Manual
Description
Bobcat T190 Turbo Service Repair Manual
G Series
S/N 527011001 & AboveS/N
527911001 & AboveS/N
527711001 & AboveS/N
527811001 & Above.
Bobcat Instructions are necessary before operating or servicing the machine. Read and understand the Operation & Maintenance Manual, Operator’s Handbook, and signs (decals) on a machine. Follow warnings and instructions in the manuals when making repairs, adjustments, or services. Check for correct function after adjustments, repairs, or service. Untrained operators and failure to follow instructions can cause injury or death.
T190 Bobcat Loader10-10-1Service Manual
LIFTING AND BLOCKING THE LOADER
Instructions are necessary before operating orservicing machine. Read and understand theOperation & Maintenance Manual, Operator’sHandbook and signs (decals) on machine. Followwarnings and instructions in the manuals whenmaking repairs, adjustments or servicing. Check forcorrect function after adjustments, repairs or service.Untrained operators and failure to follow instructionscan cause injury or death.
Bobcat T190 Turbo Service Repair Manual
LIFTING AND BLOCKING THE LOADER (CONT’D)Single Point LiftFigure 10-10-4
The loader can be lifted with the Single Point Lift which is available as a kit from your Bobcat loader dealer. Install the kit as explained in the instructions with the kit and attach the lift as shown
The Single Point Lift, supplied by Bobcat, is designed to lift and support the Bobcat loader without affecting rollover and falling object protection features of the operator cab.
T190 Bobcat Loader 10-20-1 Service Manual
LIFT ARM SUPPORT DEVICEInstalling Lift Arm Support Device
Never work on a machine with the lift arms up unlessthe lift arms are secured by an approved lift armsupport device. Failure to use an approved lift armsupport device can allow the lift arms or attachmentto fall and cause injury or death.
Service lift arm support device if damaged or if partsare missing. Using a damaged lift arm support orwith missing parts can cause lift arms to dropcausing injury or death.
W-2271-1197
Put jackstands under the rear corners of the loader frame(Inset)
.Remove the lift arm support device (Item 1)
from storage position.
ENGINE COOLING SYSTEMCleaning The Cooling System
WARNING
Wear safety glasses to prevent eye injury when anyof the following conditions exist:•When fluids are under pressure.•Flying debris or loose material is present.•Engine is running.•Tools are being used.
Check the cooling system every day to prevent over-heating, loss of performance or engine damage.Open the rear door and remove the rear grill.(SeeRemoval And Installation on Page 50-60-1.)Use air pressure or water pressure to clean the top of theoil cooler
[Figure 10-90-1]
.
WARNING
Do not use your bare hands to remove debris fromthe oil cooler. Cooling fins are sharp and may causeinjury.
IMPORTANT
AVOID ENGINE DAMAGE Always use the correct ratio of water to antifreeze. Too much antifreeze reduces cooling system efficiency and may cause serious premature engine damage. Too little antifreeze reduces the additives which protect the internal engine components; reduces the boiling point and freeze protection of the system. Always add a premixed solution. Adding full strength concentrated coolant can cause serious premature engine damage.
ADVANCED CONTROL SYSTEM (ACS)60-01 AIR CLEANER………..70-01 AIR CLEANER SERVICE………10-01 AIR CONDITIONING SERVICE80-01 AIR CONDITIONING SYSTEM FLOW….80-01 ALTERNATOR………..60-01BASIC TROUBLESHOOTING..80-01BATTERY….60-01BICS™ SYSTEM…….60-01BOB-TACH…….10-01,50-01BOBCAT CONTROLLER……….60-01BRAKE……..40-01BUCKET POSITION VALVE…..20-01CHARGE PRESSURE…………..30-01COMPONENTS………80-01COMPRESSOR………80-01CONDENSER…………80-01CONTROL HANDLE..50-01CONTROL HANDLE (ADVANCED CONTROL SYSTEM) (ACS) SELECTABLE HAND/FOOT CONTROL….50-01CONTROL PANEL (ADJUSTABLE PINTLES)……..50-01CONTROL PANEL (NON-ADJUSTABLE PINTLES)………….50-01CONTROL PEDALS..50-01CONTROL PEDALS (ACS)……50-01CONVERSIONS…SPEC-01COOLING FAN……….70-01CYLINDER (LIFT)……20-01CYLINDER (POWER BOB-TACH)………..20-01CYLINDER (TILT)……20-01DIAGNOSTICS……….60-01DRIVE BELT…………..30-01DRIVE COMPONENTS…………40-01ELECTRICAL SYSTEM INFORMATION.60-01ELECTRICAL/HYDRAULIC CONTROLS REFERENCE……….60-01ENGINE……70-01ENGINE COMPONENTS AND TESTING…………..70-01ENGINE COOLING SYSTEM…10-01ENGINE LUBRICATION SYSTEM………..10-01ENGINE SPECIFICATIONS- KUBOTA V2003-M-DI-T….SPEC-01ENGINE SPECIFICATIONS- KUBOTA V2403-M-DI-T….SPEC-01ENGINE SPEED CONTROL….70-01EVAPORATOR………..80-01EVAPORATOR/HEATER UNIT.80-01EXPANSION VALVE..80-01
Bobcat T190 Turbo Service Repair Manual
