Description
Gehl SL7600 SL7800 Operators Maintenance Manual
SL7600 SL7800 SKID STEER LOADER OPERATOR’S
This SL7600 SL7800 Operation & Maintenance Manual was written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat loader READ AND UNDERSTAND THIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR BOBCAT LOADER If you have any questions, see your Bobcat dealer.
This manual may illustrate options and accessories not installed on your loader
TABLE OF CONTENTS
Introduction
Safety
Controls And Safety Equipment
Operation
Service
Troubleshooting
Maintenance Schedule
Specifications
Index
Torque Specifications
Warranty
Engine Serial Number
All-Tach, Hydraloc and Hydraglide are trademarks of Gehl Company
Gehl and Powerview are registered trademarks of Gehl Company
Operating Instructions
Instrument Panel Identification
Left And Right Panels
Standard Key Panel
Keyless Start Panel
Option And Field Accessory Panel
Cab Heater Panel
Control Identification
Standard Controls
Seat Bar Restraint System
Operation
Bobcat Interlock Control System (Bics™)
Operation
Lift Arm Bypass Control
Operation
Parking Brake
Operation
Traction Lock Override
Operation
Emergency Exit
Rear Window
Front Door
Back-Up Alarm System
Description
Operation
Engine Speed Control
Operation
Driving And Steering The Loader
Operation
Stopping The Loader
Using The Control Levers
Gehl SL7600 SL7800 Operators Maintenance Manual
Operation & Maintenance Manual
This Operator’s Manual gives the owner/operator information about maintaining
and servicing SL7600 SL7800 SKID STEER loader models More importantly, this
manual provides an operating plan for safe and proper use of the machine Major
points of safe operation are detailed in the Safety chapter of this manual
We ask that you read and understand the contents of this manual completely and
become familiar with your new machine before operating it See your authorized
Mustang dealer if you have any questions concerning information in the manual,
require extra manuals or for information concerning the availability of manuals
in other languages
Throughout this manual information is provided set in italic type and introduced
by the word Note or Important Read carefully and comply with those
messages – it will improve your operating and maintenance efficiency, help avoid
breakdowns and damage, and extend your machine’s life.
INDEX
A
Accessory Plug . 19
Adjustments 48
Control Handles 48
Engine Speed Control . 48
Fuel Sender . 48
Air Conditioner
See Heater
Alternator/Fan Belt . 58
Attachments . 21,37
Capacities and Ratings 78
Auxiliary Hydraulic Controls
High Flow 32
Standard Flow . 31
B
Battery 61
Disconnect Switch 16
Jump-starting 36
Bucket Cutting Edge . 58
Bucket, Usage 39
Digging with a Bucket39
Driving on an Incline. 39
Driving over Rough Terrain . 39
Dumping Into a Box . 40
Dumping Onto a Pile 40
Dumping Over an Embankment40
Leveling the Ground. 41
Loading a Bucket . 40
Scraping with a Bucket. 41
C
Chaincases 51
Checking and Adding Oil . 51
Draining Oil . 51
Circuit Breakers . 61
Cold Starting Procedure. 35
Control/Indicator Symbols 4
CONTROLS AND SAFETY EQUIPMENT 15
Cooling System . 59
Check Coolant Level 59
Clean 59
Drain/Flush 59
D
Dealer Services . 45
Drive Chains
Adjust Chain Tension52
Check Chain Tension52
Dual Hand Controls 29
Auxiliary Hydraulic Controls . 31
Drive Control 29
Lift/Tilt Control . 30
E
Emergency Exit . 17
Engine Air Cleaner . 53
Engine Compartment Access 47
Engine Mounting Hardware 55
Engine Service
Change Fuel Filters . 56
Change Oil and Filter 56
Check Oil Level 56
F
Foreign Material Removal . 48
G
Guards and Shields 15
H
Hand/Foot Controls 27
Auxiliary Hydraulic Controls . 31
Drive Controls . 27
Lift/Tilt Controls 28
Heater
Filter Service 60
Operation . 19
Heater and Air Conditioner
See Heater
Highway Travel . 42