Hyundai 15L-7A, 15G-7A, 18L-7A, 18G-7A, 20L-7A, 20G-7A

Hyundai 15l-7a 15g-7a 18l-7a 18g-7a Operators Manual

Category:

Description

Hyundai 15l-7a 15g-7a 18l-7a 18g-7a Operators Manual

This is the COMPLETE Operators Manual for the Hyundai 15L-7A, 15G-7A, 18L-7A, 18G-7A, 20L-7A, 20G-7A, 15LC-7A, 18LC-7A, 20LC-7A, 20G-7, 25G-7, 30G-7, 25L-7A, 30L-7A, 33L-7A, 25LC-7A, 30LC-7A, 20GC-7, 25GC-7, 30GC-7, 35L-7A, 40L-7A, 45L-7A, 50L-7As.

This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator and Maintenance Personnel Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.

All Series:

Models Covered: Hyundai Forklift Truck

15L-7A
15G-7A
18L-7A
18G-7A
20L-7A
20G-7A
15LC-7A
18LC-7A
20LC-7A
20G-7
25G-7
30G-7
25L-7A
30L-7A
33L-7A
25LC-7A
30LC-7A
20GC-7
25GC-7
30GC-7
35L-7A
40L-7A
45L-7A
50L-7A

Hyundai 15L-7A, 15G-7A, 18L-7A, 18G-7A, 20L-7A, 20G-7A, 15LC-7A, 18LC-7A, 20LC-7A, 20G-7, 25G-7, 30G-7, 25L-7A, 30L-7A, 33L-7A, 25LC-7A, 30LC-7A, 20GC-7, 25GC-7
Hyundai 15L-7A, 15G-7A, 18L-7A, 18G-7A, 20L-7A, 20G-7A, 15LC-7A, 18LC-7A, 20LC-7A, 20G-7, 25G-7, 30G-7, 25L-7A, 30L-7A, 33L-7A, 25LC-7A, 30LC-7A, 20GC-7, 25GC-7
FREE DOWNLOAD
Price: $29.99

Hyundai 15l-7a 15g-7a 18l-7a 18g-7a Operators Manual

Operators Manual Contains:

  1. SAFETY HINTS
  2. Daily inspection
  3. Dos and donts
  4. Seat belts
  5. No riders
  6. Pedestrians
  7. Operator protection
  8. Fork safety
  9. Pinch points
  10. Travel
  11. Grades, ramps, slopes and inclines
  12. Tip over
  13. Surface and capacity
  14. Parking
  15. Step
  16. Operators safety rules
  17. OPERATING HAZARDS
  18. Loose loads
  19. Long and wide loads
  20. Rear swing
  21. Low overhead clearance
  22. Fast turns and high loads –
  23. Drop-offs
  24. Right angle stacking
  25. Chain slack
  26. Pallets and skids
  27. Caution for electrical lines
  28. Lifting loads
  29. KNOW YOUR TRUCK
  30. General locations
  31. Data/safety plates and decals
  32. Instruments and controls
  33. Indicator symbols
  34. Operating lever and switch
  35. Fuel system
  36. OPERATOR MAINTENANCE AND CARE
  37. Daily safety inspection
  38. Refueling LPG tanks
  39. STARTING AND OPERATING PROCEDURES
  40. Before operating the truck
  41. Check before starting
  42. Check before starting engine
  43. Seat adjustment
  44. Starting from a safe condition
  45. General starting and operating tips
  46. Starting the engine
  47. Check after starting engine
  48. Levers and pedals
  49. Operating safely
  50. Load handling
  51. Shut down procedure
  52. EMERGENCY STARTING AND TOWING
  53. How to tow a disabled truck
  54. How to use battery jumper cables
  55. PLANNED MAINTENANCE AND LUBRICATION
  56. Introduction
  57. Safe maintenance practices
  58. Instructions before maintenance
  59. Planned maintenance intervals
  60. Maintenance chart
  61. How to perform planned maintenance
  62. Replacement
  63. Lubrication chart
  64. Greasing point
  65. Handling machine in extremely hot places
  66. Cold weather operation
  67. Storage
  68. Transport
  69. Loading and unloading by crane
  70. Recommendation table for lubricants –
  71. Fuel and lubricants –
  72. INFORMATION FOR LPG
  73. Foreword
  74. Starting engine
  75. LPG device components
  76. LPG tank and related parts
  77. Changing the LPG tank
  78. Recommended safety maintenance procedures
  79. Installation
  80. SPECIFICATIONS
  81. Specification table
  82. Specification for major components
  83. Tightening torque
  84. TROUBLESHOOTING
  85. Engine system
  86. Electrical system
  87. Torque flow system
  88. Steering system
  89. Brake system
  90. Hydraulic system
  91. TESTING AND ADJUSTING
  92. Engine system
  93. Drive system
  94. Travel system
  95. Steering system
  96. Adjustment of parking brake lever

Related products