Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Operators Manual
Description
Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Operators Manual
This collection contains the following products:
1. Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Service Manual
2. Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Operators Manual
1. Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Service Manual
Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Operators Manual The service manual has been prepared as an aid to improve the quality of repairs by giving the serviceman an accurate understanding of the product and showing him the correct way to perform repairs and make judgements. Make sure you understand the contents of this manual and use it to full dffect at every opportunity.
This service manual mainly contents the necessary technical information for operation performed in a service workshop.
This Service and Repair Manual Covers the following Models:
Hyundai Crawler Excavator Robex 210LC-7 R210LC-7 Operators Manual
This service manual contains:
FOREWORD
INDEX
SECTION 1 GENERAL
1 Safety Hints
2 Specifications
SECTION 2 STRUCTURE FUNCTION
1 Pump Device
2 Main Control Valve
3 Swing Devices
4 Travel Devices
5 RCV Lever
6 RCV Pedal
SECTION 3 HYDRAULIC SYSTEM
1 Hydraulic Circuit
2 Main Circuit
3 Pilot Circuits
4 Single Operation
5 Combined Operation
SECTION 4 ELECTRICAL SYSTEM
1 Component Location
2 Electrical Circuit(up to # 1000).
3 Electrical Component Specification.
4 Connectors.
5 Electrical Circuit(# 1001 and up, Tier 2).
SECTION 5 MECHATRONICS SYSTEM.
1 Outline(up to # 1000).
2 Mode selection System(up to # 1000).
3 Automatic Deceleration System.
4 Power Boost System.
5 Travel Speed Control System.
6 Automatic Warming Up Function.
7 Engine Overheat Prevention Function.
8 Anti-Restart System.
9 Self-Diagnostic System.
10 Engine Control System.
11 EP PR ( Electro Proportional Pressure Reducing) Valve.
12 Prolix Switch(up to # 0179).
13 Monitoring System.
14 Outline(# 1001 and up, Tier 2).
15 Mode selection system(# 1001 and up, Tier 2).
SECTION 6 TROUBLESHOOTING.
1 Before troubleshooting.
2 Mechanical and hydraulic System.
3 Electrical System.
4 Mechatronics System.
5 Mechatronics System(# 1001 and up, Tier 2).
SECTION 7 MAINTENANCE STANDARD.
1 Operational Performance Test.
2 Major Components.
3 Track and Work Equipment.
SECTION 8 DISASSEMBLY AND ASSEMBLY.
1 Precaution.
2 Tightening Torque.
3 Pump Device.
4 Main Control Valve.
5 Swing Device.
6 Travel Device.
7 RCV Lever.
8 Turning Joint.
9 Boom, Arm and Bucket Cylinder.
10 Undercarriage.
11 Work Equipment.
SECTION 9 COMPONENT MOUNTING TORQUE.
1 Introduction guide.
2 Engine system.
3 Electric system.
4 Hydraulic system.
5 Undercarriage.
6 Structure.
7 Work equipment.
