Terex TX750 TX760 TX960 Service Manual Download
Description
Terex TX750 TX760 TX960 Service Manual Download
Terex Backhoe History Summary
TX750
TX760
TX860
TX860SB
TX960
TX965
Backhoes are manufactured by Terex – Fermec in Manchester, England.
· 1995- Models 750 / 760 / 860 / 965- 4WD & 4W steer, FERMEC with Kobe Steel started marketing Backhoe loaders in the USA As Kobelco thru Kobelco distributors.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
· 1996- Models 750 / 760 / 860 / 965- 4WD & 4W steer, In October FERMEC acquired by Case corporation.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
· 1999- Models 750B / 760B / 860B / 965B, the P100 Series introduced with Danfoss Hydraulics & new, Electrical (relay / fuse) board.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, AGCO rear axle.
· 2001- Models TX750 / TX760 / TX860 / TX860SB / TX960 / TX965, Fermec acquired by Terex corporation In June, Husco Hydraulics and Carraro axles were installed starting at s/n3905 on TX700/800 series only.
Major Components- Perkins Engine, Turner Transmission, Danfoss Hydraulics, Carraro front axle, Carraro rear axle.
Terex TX750 TX760 TX960 Service Manual Download
SECTION DESCPIPTION
1 MACHINE SPECIFICATIONS
2 CAB CONTROLS & BASIC ELECTRICAL
3 ENGINE
4 TRANSMISSION
5 BASIC HYDRAULIC SYSTEM
6 AXLES & STEERING
7 BRAKES
8 BACKHOE FUNCTIONS
9 LOADER FUNCTIONS
10 SCHEDULED MAINTENANCE
Loader control valve
· Two spool open center monoblock valves.
· Single lever operation of bucket and lift spools.
· An optional three spool closed center valve is available for the clamshell bucket.
· Maximum working pressure…. 3250 –0/+100 psi (225 – 0/+7 bar)
Backhoe control valve
· The backhoe control valve is a closed center seven spool monoblock.
· The seven spool Valve controls the boom, dipper, bucket, swing, stabilizer, extendable dipper, and auxiliary circuits.
· Circuit relief valves protect the boom, dipper, bucket, swing, extendable dipper, and auxiliary circuits.
· Optional extendable dipper/hammer (auxiliary circuit)uses a solenoid operated changeover valve is used to divert hydraulic flow to
either the extendable dipper or hammer. A separate foot pedal is used to operate a spool.
· Optional side-shift backhoe has added Solenoid valves to operate the side-shift clamp.
· Optional craning valve (only on center mount backhoe) and optional digger bucket quick attach.
· Maximum working pressure. 3250 –0/+100 psi (225 – 0/+7 bar).
Reviews
There are no reviews yet.