Daewoo Doosan Mega 500-v Wheeled Loader Service Parts Catalogue Manual
Description
Daewoo Doosan Mega 500-v Wheeled Loader Service Parts Catalogue Manual
Maintenance:
A liquid crystal display conveys information to the operator relative to the ZF transmission.
At the same time, it reports the nature of a problem (if one exists). When servicing the loader,
a specialised apparatus can be used to adjust the clutch disks to compensate for their wear.
Additionally, by connecting a lap top computer, a complete transmission diagnostic can be performed.
Daewoo Doosan Mega 500-v Service Parts Manual
Daewoo Doosan Mega 500-v Wheeled Loader Service Parts Catalogue Manual
Increased Axle durability
The brake discs have been repositioned to the rear part of the reduction gear where the rotation speed is lower. As a result, the discs are exposed to lower rpm’s and heat generation is reduced and the life span of the discs is greatly extended. Automatic disc clearance regulator has been integrated into the design and the disc clearance is maintained at the optimum level at all times as the discs wear out. This prevents any lag in brake response. Another convenient feature is that brake disc wear can easily be measured without disassembling the hub.
The brake piping has been redesigned into the axle housing and is protected from damage from external shock as the machine drives over rough terrain.
Engine
Two stage air cleaner with
pre-cleaner and external plugging
indicator as at the dashboard
External drains for engine oil and cooling
liquid changes
Maintenance warning lamp
Hydraulic fan with adjustable speed for
extreme temperatures
Electric System
Alternator 60A / 24 V
Working lights: 2 at the front and 2 at
the rear (4 x 70 W)
Driving lights: low and high beams
Tail, indicators, stop, reversing lights
Reversing alarm
Drive line
Gear box which can be declutched when
braking
Gear box with diagnosis and monitoring
indicator, and electronic plug for a fast
adjustment
Selection of Manual or Automatic mode
Starting safety system
Kickdown and travelling direction
selection: lever at left of the steering
wheel or on the joystick
Limited slip differential on front and rear
axles
Dual braking circuit with pump and
accumulator
Tire 23.5 – 25 – 16PR (L3)
Lifting and Hydraulic system
Robust Z bar lifting system
Standard general purposes 3.0m3 bucket
Single lever joystick
Hydraulic control valve with two sections
Boom adjustable lift Kick out
Bucket kick out
Fast couplers for hydraulic check
